Business

grace
alina


Customer Service

lily


Technical


Engineer

ASTRA TECHNOLOGY CO., LTD

Skype:sales@astra-ic.com Tel:86-13147036431 E-mail:sales@astra-ic.com

30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft
30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft

30A 40A 60A 80A 125A 200A Brushless ESC Motor Speed Controller Electronic Governor For RC Fixed Wing Multi-axis Aircraft

Product Parameters:
Extreme use:Continuous current 30A, instantaneous 35A, 40A for 10 seconds. Voltage range:4V-16VColour:yellow
Number of batteries:4-12NIMH2-3LIPO(4LIPO is not allowed to use BEC output)
BEC output:Continuous 2A,(Instantaneous 3A)2LIP04-5 mini servo3LIP0 3-4 mini servo

Protection functions: automatic selection of 2-3LIPO, respectively, the protection voltage is 6V/9V; automatic selection of NIMH, each section of the protection voltage is 0.8V; safe start, the throttle position is not right to prohibit the start; temperature protection, 110 degrees surface temperature shutdown; out of control protection, no signal 1 second after the shutdown.


Performance Description:
RPM limit, up to 300,000 rpm for 2-pole internal, 50,000 rpm for 12-pole external, and 42,000 rpm for 14-pole external.8KHz PWM control, using RPM control curve. Automatic throttle adaptation, suitable for more remote control devices. Use BEC, MCU separate power supply, work more stable.


Product Categories
Related Products
Description

Setting method:
1. Turn on the transmitter and push the throttle to the maximum (Futaba series transmitter needs to select Rev for throttle channel).
2. Connect the receiver and motor.
3. When the power supply is turned on and the transmitter is normal, there is the following sound: (if there is a long "tick" sound after the sound is over, and there is no sound after that, check the reverse setting of the accelerator channel of the transmitter.)


Product Advantages:

1.The product is made of high quality PCB material, quality is guaranteed.
2.Stable performance, long service life, shipped with electrostatic bags for protection.
3.High-current ESC, 30A and 40A parameters can be selected.
4.ESC has overheating and misoperation protection function.
5. Easy to use and operate, very suitable for DIY enthusiasts.
Welcome your enquiry!
Full Name: *
Tel: *
E-mail:
Product Name: *
Content: *
 
To Top