Smart phone APP control 12v5050 IP65 light strip led light strip waterproof RGB colorful Smart strip lights

Product Description:

1. Addressable full color led strips ——APA102C IC built-in.
2. Individually control —— 1 IC & I LED chip.
3. Standard Reel Length: 5meter/roll, also can be customized.
4. Cutted: 1 integrated RGB LEDs per segment, can be cutted per 1LED. you can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.65''/0.7cm(1 LED each), Solder to the 0.1'' copper pads.
5. Power supply: Different input voltage require different power supply, such as the DC5V input voltage for led strip, then you must use a 5V DC power supply to power this strip, do not use higher than 6V or you can destroy the entire strip.
6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;
waterproof: glue on top to do waterproof, or 3M adhesive back side.
7. Connectors: 4PIN JST female and male connectors, DAT, CLK, DC5V+, GND-.
these LEDs have 2 wires (input and output) for sending data - one clock pin and one data pin. That means you need two pins, to control Dots. Because the clock and data is seperated, you can use any processor speed or type to control these strips.
8. Type: This is the 120 LED-per-meter version, We have 30 LED/m, 60 LED/m and 144 LED/m.
9. LED Brightness: Red ~600mcd, Green ~500mcd, Blue ~150mcd
10. Brand: LED strip Light

Specifications:
Below Table are some basic Specifications of led strip light, for some detailed specifications, you can send any of your questions to us, then we may start to answer you, and show you about our OEM ODM services